Using The Flash - HP Photosmart 215 User Manual

Using the Flash

When the camera is turned on, the flash setting defaults to
setting is indicated by an icon on the status LCD:
Auto Flash The camera
determines the need for a flash
based on lighting conditions.
Flash Off Set the flash to Off
when you want to be sure the flash
is not used.
To adjust the flash:
1. Slide the
2. Press the
3. Turn the
4. Turn the
www.hp.com/photosmart
switch up to the camera icon.
mode
dial to display the Capture menu on the image LCD.
menu
dial to highlight the current
menu
dial to highlight a
menu
Auto Flash with Red-eye
reduction Minimizes the occurrence of
red-eye in photos of people or animals.
The flash goes off twice—once to
condition the subject's eyes for the flash,
and a second time to take the photo.
Fill Flash Set the flash to Fill when the
lighting for the entire photo is sufficient,
but the lighting for the subject is not, as
in a backlighting situation.
icon, then press the
Flash
setting, then press the
Flash
. The flash
Auto Flash
menu
dial.
menu
dial.
19