HP z560 Setup Manual page 10

5 Verify that the video equipment is properly connected to the HP Digital Entertainment Center and the
TV/displays are turned on. Click Next.
6 If you are using Component Video Out, select your connection type and then click Next.
NOTE: S-video and Composite Video Out are not supported for the HP Digital Entertainment Center.
7 Do the following for your Video Out connection type and connected cable.
Video Out
HDMI
Step 7
(continued)
VGA
Component
(Y, Pb, Pr)
6
HP Digital Entertainment Center TV/Display Setup Guide
Action
Select the HDTV Mode. Click Next.
Follow the onscreen instructions. Click Next.
Skip this step. Go to step 8.