V. ASSEMBLY INSTRUCTIONS
NOTE:
Some nuts and bolts are attached on the parts, and you will need to remove and re-attach it to the
connecting parts.
#A S5
STEP 1
a. Take out bolts (25), spring washers (48) and washers (30) from rear support frame (62) and rail (55)
using spanner (A). Then secure rear support frame (62) with rail (55) using bolts (25), spring washers
(48), washers (30) and tighten with spanner (A).
b. Take out the bolts (61) and washers (39) from rail (55) by spanner (A), then secure handlebar (59) with
rail (55) using bolts (61), washers (39) and tighten with spanner (A).
c. Attach seat (76) onto rail (55).
d. Install limiters (57) to rail (55) using bolts (56) and tighten with spanner (A).
e. Attached rail cover (64) to rail (55).
55
59
39
57
61
56
30
48
25
#25 M8*20*S5 2pcs.
#30 d8*Ф20*2 2pcs.
#39 d6*Ф12*1.5 2pcs.
#48 d8 2pcs.
#56 M6*20*S5 2pcs.
#57 Ф27 2pcs.
#61 M6*20*S5 2pcs.
#64 76*86*18 1pc.
57 56
76
25
48
30
62
64
ASSEMBLY INSTRUCTIONS |
9