Agency Notices; Regulatory Compliance Identification Numbers; Federal Communications Commission Notice - HP xw3100 Safety And Regulatory Information Manual

regulatory compliance identification numbers

federal communications commission notice

safety & regulatory information
For the purpose of regulatory compliance certifications and
identification, your product has been assigned a unique HP series
number. The series number can be found on the product nameplate
label, along with all required approval markings and information.
When requesting compliance information for this product, always
refer to this series number. The series number should not be confused
with the marketing name or model number of the product.
Part 15 of the Federal Communications Commission (FCC) Rules and
Regulations has established Radio Frequency (RF) emission limits to
provide an interference-free radio frequency spectrum. Many
electronic devices, including computers, generate RF energy
incidental to their intended function and are, therefore, covered by
these rules. These rules place computers and related peripheral
devices into two classes, A and B, depending upon their intended
installation. Class A devices are those that may reasonably be
expected to be installed in a business or commercial environment.
Class B devices are those that may reasonably be expected to be
installed in a residential environment (i.e., personal computers). The
FCC requires devices in both classes to bear a label indicating the
interference potential of the device as well as additional operating
instructions for the user.
The rating label on the device shows which class (A or B) the
equipment falls into. Class B devices have an FCC logo or FCC ID on
the label. Class A devices do not have an FCC logo or FCC ID on the
label. Once the class of the device is determined, refer to the
following corresponding statement.
www.hp.com

agency notices

1
1–1