HP X Class 500/550MHz Reference Manual page 99

Advanced Menu
The Advanced menu does not have the same structure as the Main menu and Power
menu. Instead of presenting a list of fields, it offers a list of sub-menus. The Advanced
menu contains the following sub-menus:
• Processors, Memory and Cache. Configures processor, memory caching, and
processor cache error correction (if supported by the supplied processor).
• Flexible Disk Drives. Enables or disables the on-board flexible disk
controller.
• IDE Devices. Configures IDE devices.
• Internal SCSI 16bits (Adaptec). Enables or disables the 16-bit Adaptec integrated
SCSI interface (refer to the section "Sub-BIOS Systems for SCSI Controllers" in this
chapter).
• Integrated I/O Ports. Enables or disables the on-board parallel and
serial ports at the specified address.
• External and Internal SCSI 16/8-bit (Symbios) Interface. Enables or disables the
integrated SCSI Symbios interface (refer to the section "Sub-BIOS Systems for SCSI
Controllers" in this chapter).
• Integrated Network Interface. Enables or disables the integrated network interface.
This feature must be enabled when an ethernet card is installed.
• Integrated USB Interface. Enable or disable the integrated USB (Universal Serial
Bus) interface. You can also redirect the second USB connection to a special AGP board
(for example, a USB monitor).
• Integrated Audio Interface. Enables or disables the audio interface. This feature is
useful on non plug-and-play operating systems, because the integrated audio chip is
plug-and-play.
• PCI Slot Configuration. Sets the PCI Bus Master bit through the BIOS. This could be
necessary for some older PCI accessory boards.
• ISA Resource Exclusion. Reserves interrupts for legacy ISA devices to prevent
conflict with PCI/PnP devices.
Chapter 4
HP BIOS
HP/Phoenix BIOS Summary
99