Suggestions For Corrective Action - HP Vectra XW Technical Reference Manual

SCA01
SCA02
SCA03
SCA04
5 Power-On Self-Test and Error Messages

Suggestions for Corrective Action

Suggestions for Corrective Action
An exhaustive list of the suggestions for corrective action (SCA) is given
here, to accompany the list of the error codes that is given in the previous
section. In order to find the suggested corrective action, it is necessary to
read the five-character code that is given on the right of the error code in
the previous section. This SCA code can then be found in the list in this
section. These have been sorted into numerical order, to make it easy to find
the appropriate entry.
• Your system board may need to be replaced. Contact your service
representative.
1 Remove or disable the ROM(s) on the accessory board one by one to de-
termine which one, if any, has failed.
2 If this fails to correct the problem, your system board may need to be re-
placed. Contact your service representative.
• For models without a battery, this problem may occur if
the PC is left unplugged for periods of 24 hours or more.
• For models with battery, replace the battery.
1 Run Setup to correct the date and time information.
2 If after running Setup the problem re-occurs even after a RESET or
Delete
set to Off.
3 If all the above fail, your system board may need to be replaced. Contact
your service representative.
1 Run Setup to correct the configuration information.
2 If after running Setup the problem re-occurs even after a RESET or
Delete
set to Off.
3 If all the above fail, your system board may need to be replaced. Contact
your service representative.
54
, ensure that the CONFG switch on the system board is
, ensure that the CONFG switch on the system board is