Using The Hp Setup Program - HP Vectra VL800 Troubleshooting Manual

First, Turn On or Restart
Your PC
To Go to the Setup
Program

Using the HP Setup Program

The Setup program allows you to view and change the configuration of
your PC, such as the passwords and boot device order. Follow these
instructions to check the configuration.
If your PC is off, turn on the display and then the PC.
If the PC is already turned on, save your data, exit all programs and
restart your PC. For Windows operating systems, use the





Restart your computer
automatically exit the operating system and restart the PC.
To go into the Setup program, press
your display.
command in the
Start
F2
2 Use or Configuration Problems
Using the HP Setup Program
Shut Down
menu. This command will
while the HP logo appears on
35