Cisco 7900 Series System Manual page 32

Phone Configuration Checklist
Table 43-5 Phone Configuration Checklist for SCCP Protocol (continued)
Configuration Steps
Step 3 Add and configure lines (DNs) on the phone. You can also
configure phone features such as call park, call forward, and call
pickup.
Step 4 Configure speed-dial buttons.
You can configure speed-dial buttons for phones if you want to
provide speed-dial buttons for users or if you are configuring
phones that do not have a specific user who is assigned to them.
Users can change the speed-dial settings on their phones by using
Cisco Unified IP Phone User Options.
Step 5 Configure Cisco Unified IP Phone services.
You can configure services for Cisco Unified IP Phone models
7970/71, 7960/61, 7940/41, 7912, and 7905 and Cisco IP
Communicator if you want to provide services for users or if you
are configuring phones that do not have a specific user who is
assigned to them. Users can change the services on their phones
by using Cisco Unified CallManager User Options.
Step 6 Customize phone button templates and softkey templates, if
required. Configure templates for each phone.
Step 7
Configure the Busy Lamp Field feature, if required. You must use
customized phone button templates to configure BLF/SpeedDial
buttons.
Step 8 Assign services to phone buttons, if required.
Step 9 Provide power, install, verify network connectivity, and configure
network settings for the Cisco Unified IP Phone.
Step 10 Associate user with the phone (if required).
Step 11 Make calls with the Cisco Unified IP Phone.
Cisco Unified CallManager System Guide
43-32
Chapter 43
Procedures and Related Topics
Configuring a Directory Number, Cisco
Unified CallManager Administration Guide
Configuring Speed-Dial Buttons, Cisco
Unified CallManager Administration Guide
Configuring Cisco Unified IP
Unified CallManager Administration Guide
Configuring Phone Button
Unified CallManager Administration Guide
Configuring Cisco Unified IP
Unified CallManager Administration Guide
Adding Nonstandard Softkey
Cisco Unified CallManager Administration
Guide
BLF/SpeedDial Configuration
Unified CallManager Administration Guide
Adding a Cisco Unified IP Phone Service to a
Phone Button, Cisco Unified CallManager
Administration Guide
Cisco Unified IP Phone Administration Guide
for Cisco Unified CallManager
Associating Devices to an End
Unified CallManager Administration Guide
Refer to the user guide for your Cisco Unified
IP Phone.
Cisco Unified IP Phones
Phones, Cisco
Templates, Cisco
Phones, Cisco
Templates,
Settings, Cisco
User, Cisco
OL-14153-01