Complete The Questionnaire To Check Your Understanding - HP Vectra VL6 6 Supplementary Manual

Complete the Questionnaire to Check Your Understanding

Complete the Questionnaire to Check Your Understanding
Draw a circle around each letter that corresponds with a correct answer.
(There may be more than one correct answer to each question).
1 The following PC, supplied with a 4 GB hard disk, CD-ROM drive and
audio board, has had components added by the user, and now no longer
works. Which of the following could be the source of its failure to operate
properly?
a An 1 GB IDE hard disk drive has been fitted in the second internal
shelf, and has been connected to the spare grey IDE connector.
b A non-HP tape drive has been fitted in the lower front access shelf, and
has been connected to the spare FDD connector.
c There is an HP 32 MB memory module in memory socket C1, but
socket C2 is empty.
d Memory sockets B1 and B2 are empty.
e There is a pair of non-HP 4 MB memory modules in bank A.
f A non-HP network-board has been installed as a PCI accessory.
2 The client wishes to accelerate the processing throughput of the PC.
Which of the following options are viable:
a Replacing the current 233 MHz processor by a 266 MHz processor.
b Replacing the current processor by an overdrive processor
(when available).
c Installing more level-2 cache memory modules.
d Installing more main memory modules.
3 Which of the following statements is correct (when installing a device in
the lower 5.25-inch front-access drive shelf of the desktop model)?
a The new drive will already have the correct front bezel.
b The filler bezel on the front panel needs to be modified with a knife.
c The PC is supplied with the correct replacement bezel for the drive.
d A kit of bezels (PN 5064-2667) needs to be ordered from HP.
e No bezel is necessary.
14