Nvidia Geforce3 Ti200 Graphics Card; Nvidia Tnt2 Vanta Graphics Card - HP Vectra VL420 Technical Reference Manual

System Features

Nvidia GeForce3 Ti200 Graphics Card

Some VL420 Minitower PC models are supplied with an Nvidia GeForce3 Ti200 64MB graphics card.
The Nvidia GeForce3 Ti200 card has 2 outputs, VGA and DVI. Either the VGA or the DVI output can be
used, the outputs cannot be used for dual-monitor displays (unlike the GeForce2 MX).
For more information, refer to the Technical Reference Manual - HP Business PC Technology
available in PDF (Acrobat) format from www.hp.com/go/vectrasupport .
Key Features
NV20 ASIC + 64 MB DDR SDRAM
•
175 MHz GPU clock
•
128 bit/200 MHz memory interface:
•
AGP 4x with Fast Writes
•
256 bit graphics accelerator
•
VGA, DB15, VESA DDC2B
•
350MHz internal RAMDAC
•
2048x1536x32bpp @ 60 Hz maximum resolution
•
1600x1200 maximum resolution
•
6.4 GB/sec memory bandwidth
•
5 Million triangles per second.
•

Nvidia TNT2 Vanta Graphics Card

Some Vectra VL420 PC models are supplied with an Nvidia TNT2 Vanta graphics card.
A low-profile version of this card is also available for the VL420 small form factor. The low profile version
has the same functionality as the standard version.
For more information, refer to the Technical Reference Manual - HP Business PC Technology
available in PDF (Acrobat) format from www.hp.com/go/vectrasupport .
Key Features
16MB 7ns 64-bit SDRAM memory (125MHz clock, 1.0GB/sec bandwidth)
•
300MHz RAMDAC built-in
•
AGP 2X
•
PC 99 DB-15 analog monitor connector (VESA DDC2B + DPMS)
•
Cooled by heat sink only
•
Full hardware triangle setup
•
200 Million pixels per second (textured, anisotropic filtered)
•
5 Million triangles per second.
•
30 product description