Cisco ONS 15454 SDH User Manual page 26

15.6.2 STM-1E Card Performance Monitoring Parameters
Table 15-28 High-Order VC4 and VC4-Xc Path PM Parameters for the Far-End
Parameter
HP-SESR
HP-BBER
15.6.2 STM-1E Card Performance Monitoring Parameters
Figure 15-8
parameters for the STM-1E card.
Figure 15-8 PM Read Points on the STM-1E Cards
ONS 15454 SDH
Ports 9-12 can be provisioned as E4 framed from the Provisioning > Ports tabs.
VC4 performance monitoring parameters in E4 mode.
Cisco ONS 15454 SDH Reference Manual, R4.6
15-26
STM1 SH 1310-8 Cards (continued)
Definition
High-Order Path Severely Errored Second Ratio (HP-SESR) is the ratio
of SES to total seconds in available time during a fixed measurement
interval.
High-Order Path Background Block Error Ratio (HP-BBER) is the ratio
of BBE to total blocks in available time during a fixed measurement
interval. The count of total blocks excludes all blocks during SESs.
shows where overhead bytes detected on the ASICs produce performance monitoring
STM-1E Card
Pointer Processors
RS-ES
RS-ESR
RS-SES
RS-SESR
RS-BBE
RS-BBER
RS-UAS
RS-EB
MS-ES
MS-ESR
MS-SES
MS-SESR
MS-BBE
MS-BBER
MS-UAS
MS-EB
OCEAN
ASIC
HP-ES
HP-ESR
HP-SES
High-
HP-SESR
Order
HP-BBE
Path
HP-BBER
Level
HP-UAS
HP-EB
MS-PPJC-Pdet
MS-NPJC-Pdet
MS-PPJC-Pgen
MS-NPJC-Pgen
PMs read on OCEAN ASIC
Chapter 15 Performance Monitoring
Cross-Connect
Card E1
Figure 15-9 shows the
April 2008