Download Print this page

Replacing The Processor; Installing Memory - HP ProLiant ML110 Installation Sheet

Hp proliant ml110: install guide
Hide thumbs Also See for ProLiant ML110:

Advertisement

Optical drive – shield removal
Optical drive – installation

Installing memory

The server has four DIMM slots that support up to 8 GB maximum
system memory (2 GB in each of the four DIMM slots).
The following guidelines must be followed when memory modules
are being added or replaced:
Use only DDR II 533/667 unbuffered ECC DIMMs in 512 MB,
1 GB or 2 GB module.
Up to two DIMMs per channel, single-sided and/or double-
sided. Channel A corresponds to the DIMM1 and DIMM2
slots, while channel B corresponds to the DIMM3 and DIMM4
slots.
For optimal 2 DIMMs configuration, populate slot 1 and slot 3.
Identical DIMMs are recommended.
CAUTION:
DIMMs can be damaged by improper
handling. Always use an anti-static wrist strap and
grounding mat, and discharge static electricity before
touching DIMMs.
DIMM slots are structured to ensure proper installation. If you insert a
DIMM but it does not fit easily into the slot, you may have inserted it
incorrectly. Reverse the orientation of the DIMM and insert it again.

Replacing the processor

The LGA775 CPU socket in HP ProLiant ML110 Generation 4 server
supports Intel
®
Pentium
®
4, Intel
and Xeon
3000 series processors.
®
Getting additional documentation
For additional documentation, refer to HP ProLiant ML110
Generation 4 Server Support CD. You can also access additional
information and documentation from the HP website, www.hp.com
either by connecting directly or through the Support CD.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Intel, Pentium, Xeon and Celeron are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other countries.
®
Pentium
®
-D, Celeron
®
-D processors

Advertisement

loading

This manual is also suitable for:

Proliant ml110 generation 4