Table of Contents
Advertisement
Check the oil level in the motor crankcase daily.
Inspect the rubber anti vibration mounts for wear or deterioration.
If the optional water tank is fitted inspect the water hose and its connections to ensure that they do not leak.
Clean the underside of the plate regularly to prevent a build up of material.
CAUTION:
Inspection and other services should
always be carried out on hard and level
ground with the engine shutdown.
Inspection and Maintenance Service Tables.
To make sure your plate compactor is always in good
working
condition
before
maintenance inspection in accordance with Tables 1
through 3.
TABLE 2. ENGINE CHECK
(For details, see separate engine Manual)
Item
Leakage of oil fuel
Tightness of fastening
Threads
Engine oil check and
replenishment
Engine oil
replenishment
Air cleaner cleaning
CAUTION:
These
operation
Adjust your inspection intervals based
on the number hours plate compactor is
in use, and particular working conditions.
Daily Service
Check for leakage of fuel or oil.
Remove soil and clean the bottom of compaction plate.
Check engine oil.
Check for loose screws including tightness. See Table 3 above (tightening torque), for retightening.
CARE AND PREVENTIVE MAINTENANCE
using,
carry
out
Hours of Operation
Every 8 hours (every day)
Every 8 hours (every day)
Every 8 hours (every day)
(Replenish to specified
Max. level)
At first 20 hours, then
every 100 hours
Every 50 hours
inspection
intervals
under
normal
conditions.
TABLE 1. MACHINE INSPECTION
Item
(Starting check)
Loosened of lost screws
Damage of any part
Function of controlling
system part
Vibrator oil check
Vibrator oil replacement
the
V-belt (clutch) check
TABLE 3. TIGHTENING TORQUE (in. kg/cm) Diameter
Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm
4T
70
150
6-8T
100
250
11T
150
400
*
100 (6mm) 300-350 (8mm) 650-700 (10mm)
*(In case counter-part is of aluminium)
(Threads in use with this machine are all right handed)
Material and quality of material is marked on each bolt, and screw.
CAUTION:
are
for
5
Hours of Operation
Every 8 hours (every day)
Every 8 hours (every day)
Every 8 hours (every day)
Every 8 hours (every day)
Every 100 hours
Every 200 hours
Every 200 hours
300
500
750
1100
500
800
1300
2000
800
1200
2000
2900
Fuel piping and connections
should be replaced every 2
years.
1400
2000
2700
3800
4200
5600
Advertisement
Table of Contents
