WARNING
Replacing the Power Supply
To avoid electric shock, do not open the power supply. There are no
user-serviceable parts inside.
1 Remove the computer's cover and the front chassis (described in
this chapter).
2 Remove the riser card and bracket (see page 21).
3 Remove the power supply connector.
4 Remove the two screws that secure the power supply in position and
gently ease it out of the PC.
5 Carefully insert the power supply unit into the PC, aligning it
correctly.
6 Replace the power supply connector.
7 Replace the riser card and bracket (described in this chapter).
8 Fasten the two screws that secure the power supply in position.
9 Replace the front chassis and the computer's cover (described in this
chapter).
HP NetVectra PC Replacing Hardware Components
Replacing the Power Supply
English 25