Safety Warnings; Rack Stability - HP J class 3 Supplementary Manual

safety information

safety warnings

WARNING
WARNING
WARNING
accordance with the Customer Support Services Agreement.
For your protection, HP products are tested for conformance to various
national and international regulations and standards. The scope of this
regulatory testing includes electrical and mechanical safety,
electromagnetic emissions, electromagnetic immunity, ESD (electrostatic
discharge), acoustics, and hazardous materials. Where required,
certifications are obtained from third-party test agencies. Certification
marks appear on the product label. In addition, various regulatory
bodies require information to appear in User Manuals.
safety warnings
An hp visualization center sv6 product rack can weigh 1500 lbs.
(681 kg) when fully loaded with hardware components. Heed all
of the conditions in the WARNING statement under the RACK
STABILITY subsection below when moving and servicing an HP
product rack and its rack-mounted hardware components.
Your hp visualization center sv6 product may not have been
evaluated for connection to an IT power system (an AC
distribution system having a high impedance connection to
earth according to IEC 950).

rack stability

To reduce the risk of rack instability:
• Install the heavier hardware components at the bottom of the
rack, below the center of gravity for the rack. Never install
heavier components in the top or upper portion of the rack.
8 Chapter 1