Shipping Bracket - Compaq Evo W8000 Maintenance And Service Manual
Hp evo w8000: user guide
Hide thumbs
Also See for Evo W8000:
- Hardware reference manual (84 pages) ,
- Supplementary manual (13 pages) ,
- Troubleshooting manual (83 pages)
Table of Contents
Advertisement
Removal & Replacement Procedures
4.8
Shipping Bracket
1. Prepare the workstation for disassembly (Section 4.2), then place it on its side.
Ä
CAUTION: Before removing the access panel, ensure that the workstation is turned off,
and all cables are disconnected from the back of the workstation.
2. Remove the access panel (Section 4.5).
3. Remove the four screws that connect shipping bracket to the front of the chassis.
4. Remove the shipping bracket from the chassis.
To replace the shipping bracket, reverse the above procedure.
4–8
Maintenance & Service Guide
Advertisement
Table of Contents
