HP Deskpro 1000 Reference Manual page 72

Power-On Self-Test Messages
Message Probable Cause
Keyboard is Locked This message usually
Out - Unlock the indicates that one or more
Key keys have been pressed
during the keyboard tests.
Memory Test This message displays during
a full memory test, counting
down the memory areas being
tested.
Memory Test Fail If POST detects an error
during memory testing,
additional information appears
giving specifics about the type
and location of the memory
error.
Primary Master Hard POST detects an error in the
Disk Fail primary master IDE hard
drive.
Primary Slave Hard POST detects an error in the
Disk Fail primary slave IDE hard drive.
Secondary Master POST detects an error in the
Hard Disk Fail secondary master IDE hard
drive.
Secondary Slave POST detects an error in the
Hard Disk Fail secondary slave IDE hard
drive.
Continued
Recommended Action
Ensure no objects are resting on the keyboard.
None.
If this happens often, the memory module may
need to be replaced.
Ensure the controller is installed correctly, the cable
is attached correctly, and the hard disk jumper is
set to primary master. If no hard drive is installed,
be sure the hard drive selection in Setup is set to
none.
Ensure the controller is installed correctly, the cable
is attached correctly, and the hard disk jumper is
set to primary slave. If no hard drive is installed, be
sure the hard drive selection in Setup is set to none.
Ensure the controller is installed correctly, the cable
is attached correctly, and the hard disk jumper is
set to secondary master. If no hard drive is
installed, be sure the hard drive selection in Setup
is set to none.
Ensure the controller is installed correctly, the cable
is attached correctly, and the hard disk jumper is
set to secondary slave. If no hard drive is installed,
be sure the hard drive selection in Setup is set to
none.
Reference Guide C-3