Upgrading The Computer; Removing The Computer Cover - HP Deskpro 1000 Reference Manual

Removing the
Computer Cover
5
chapter
U
PGRADING THE
This chapter explains how to remove the computer cover,
provides an inside view of the computer, and explains how to
install additional system memory and graphics memory.
For other upgrades, contact your local Compaq authorized
service provider.
To install optional equipment, you must remove the computer
cover.
CAUTION:
Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
To remove the computer cover, complete the following steps:
1. Turn off the computer and any external devices.
2. Disconnect the power cord from the power outlet and any
external devices from the computer.
3. Remove the three screws on the rear panel of the computer.
4. Slide the computer cover backward about 1 inch (2.5 cm);
then, lift it up off the unit.

Removing the Computer Cover

C
OMPUTER
Reference Guide 5-1