Password Prompting; Establishing A Supervisor Password; Establishing A User Password - HP Deskpro 1000 Reference Manual

Password Prompting

Establishing a Supervisor Password

Establishing a User Password

4-2 Support Software
Under the BIOS Feature Setup, you have the option to be
prompted for a password every time you start the computer or
only when you enter the CMOS Setup Utility. To select an
option, under the BIOS Feature Setup:
Select System under the Security Option field to be
prompted for the Supervisor Password every time you try to
enter the CMOS Setup Utility and to be prompted for the
User Password every time you turn on the computer.
Select Setup under the Security Option field to be prompted
for the password only when you turn on the computer.
By establishing a Supervisor Password, you can protect the
system configuration and prevent unintentional or unauthorized
configuration changes. Once this password is established, you
cannot change the system configuration until you enter the
password.
1. From Setup, select the Supervisor Password option.
2. Type your password and press
3. You will be asked to confirm the password. Retype the
password and press
If necessary, you may press
and not enter a password.
By establishing a user password, you can prevent unauthorized
access to information stored on the computer or the network.
Once this password is established, you cannot use the computer
until you enter the password.
1. From Setup, select the User Password option.
2. Type your password and press
3. You will be asked to confirm the password. Retype the
password and press
.
Enter
.
Enter
Esc to abort the password selection
Enter.
Enter.