Creating The Auto Log On User Account; Configuring The Tec Session To Launch At Reboot - HP Compaq t5500 User Manual

Creating the Auto Log On User Account

1. Create a login user by selecting Start > Settings > Control Panel.
2. Double click the Security icon and select the Users tab.
3. Create a new user, such as "vt-100 user", by clicking Add and entering the new user
name. Click OK.
NOTE: Do not assign a password for the new user at this time.
4. Select the System tab on the Security screen. Click the Enable Security box and the
Automatic Log On box. Select the new user name you just created as the account by
clicking on the "Account" drop down menu and selecting the new user name. Click OK.
5. Close the Control Panel by clicking on the X in the upper right hand corner of the
screen.

Configuring the TEC Session to Launch at Reboot

1. Create a TEC session using one of the above mentioned
connection, such as " connection1 (TEC)."
2. Select Start > Settings > HP Connection Administrator.
3. Click the Administration button.
4. Click the + button to expand the Connections tree. Ensure that "connection1 (TEC)"
exists in the list of connections. If "connection1 (TEC)" is not on the list, go back to the
previous section and ensure you have followed the steps to create the connection.
5. Right click Profiles and select New Profile to create a new profile, such as "vt-100
profile".
NOTE: When creating a new profile, a default name of "New Profile" is created. Highlighting the newly
created profile name, then single-clicking within the name text will allow the name to be modified.
6. Assign "connection1 (TEC)" to the newly created profile by drag-and-dropping it from
"Connections" to "vt-100 Profile".
7. Click the + button of "vt-100 Profile" to expand the tree. Ensure that "connection1
(TEC)" is listed.
8. Assign the "vt-100" user login to the "vt-100 Profile". Click vt-100 Profile and then
click the Users button on the right side of the screen.
9. Select "vt-100 user" and click the >> button to move to the right hand box. Click OK.
10. Under Connection Options, select the Automatically Connect option. Under Windows
Start Mode, select Kiosk. Click OK.
11. Reboot. The TEC session will launch at reboot.
AB300A Console User Guide
HP CONFIDENTIAL Codename: Part Number: AB300-90001 Last Saved On: 2/10/04 2:39 PM
methods. Assign a name to the
11