Led Displays; Accessories - Pepperl+Fuchs IMUF99 B20 Series Manual

Inertial Measurement Unit IMUF99*B20
Product Description
2.2

LED displays

The IMU360D-F99 has three LED indicators that allow rapid visual monitoring.
• The green power LED indicates the state of the power supply
• The yellow run LED indicates the bus and sensor status
• The red err LED indicates an error
LED
Green: power
Yellow: run
Red: err
Table 2.1
Possible sources of error causes:
• CAN master is not initialized
• Baud rate is wrong
• CAN-high and CAN-low channel are interchanged
2.3

Accessories

Various accessories are available. See datasheet or relevant product page on the Internet
www.pepperl-fuchs.com.
State Description
On Voltage ok
Off No power or sensor defect
On Operational mode
Blinking slowly Parameter mode user
Off Error see red LED "err"
On
•
•
•
Blinking slowly Claiming conflict, Null address (254)
Flashing CAN err warning level
Off No error
Address claiming (max 250 ms)
or no bus connection
or CAN error passive level (max. 128 retries)
11