sidhil 1310 Fitting Instructions

Leg fixture kit, toilet aid

Leg Fixture Kit – 1310/EX/FF Toilet Aid

Fitting Instructions

Introduction

Thank you for purchasing this product. These fitting instructions should be read carefully before assembly of the fixed

commode legs. Please ensure that you understand all instructions, if you have any questions concerning the operation or

maintenance of the toilet aid please contact your provider.

Contents

x4 Fixed commode legs

Risk Assessment

Before fixing the legs and fitting them to the unit, assess the positioning and any relevant safety checks.

•

If standard legs are present, remove them by unclipping the "E" clips and retain for use with the fixed leg kit.

•

Once the standard legs are removed, insert fixed leg units to replace them (make sure fixture holes are facing

away from the unit)

•

When all 4 legs are inserted, place the commode at the desired height and lock the legs in place using the "E"

clips that were previously removed.(It is vital that you verify the height desired as the legs will not be

adjustable once fixed to the floor).

Removal of

"E" clips.

Note orientation

of holes.

Table of Contents

Do you have a question about the 1310 and is the answer not in the manual?

Page 1 Leg Fixture Kit – 1310/EX/FF Toilet Aid Fitting Instructions Introduction Thank you for purchasing this product. These fitting instructions should be read carefully before assembly of the fixed commode legs. Please ensure that you understand all instructions, if you have any questions concerning the operation or maintenance of the toilet aid please contact your provider.
Page 2 • The commode must not be used if “E” clips are not correctly inserted into the legs or are missing. • All the legs should be at the same height • Sidhil cannot accept responsibility for incorrect/insecure fitment to the floor. Decontamination, Maintenance & Warranty These instructions apply to all products apart from soft products (e.g.

1310/ex1310/ff