Canon BJC-55 User Manual page 442

Scanned Image Blurred or Distorted
Check 1
A
RE YOU USING A CLEAR IMAGE FOR SCANNING
Blurry images are not suited for scanning. For best scanning results,
always use a clear, sharp image. (The scanned image cannot be better
than the original image.)
Check 2
I
S THE SCANNING HOLDER UNSTAINED AND UNDAMAGED
The scanning holder is bound to get dirty. Clean the scanning holder using
a soft cloth that is dipped in a weak, neutral detergent solution, and then
wipe its wet surface off with a dry, soft cloth.
If the scanning holder is scratched or damaged, replace it.
Note You can purchase a scanning holder for A4/LTR-size images. Visit the
Canon Web site to find out about accessories and supplies
(www.ccsi.canon.com).
Check 3
A
RE YOU SCANNING THICK PAPER
The image being scanned must be thinner than 0.01 in. (0.25 mm). The
thickness including the scanning holder must be thinner than 0.02 in.
(0.45 mm).
?
Using the Optional IS-12 Color Image Scanner Cartridge
Scanner Problems
?
?
442