Printing Blurred Or Smudged - Canon BJC-55 User Manual

I Printing blurred or smudged
Determine if you are printing on plain paper with Print Quality set for Fine
Printing in the Fine mode could result in excess ink on the paper. Reduce the print quality to
avoid blurring or smudging.
Printing With Windows 98 or Windows CE
Printing With Windows 2000
Printing With Macintosh
Check to see if the paper thickness is within the specified thickness
Do not use paper thicker than 28 lb. (105 g/m
Determine if the document exceeds the recommended print area
Adjust the setting to print within the recommended print area. Printing outside the
recommended printing area could cause blurring or smudging.
Printing Area
If you are using glossy paper, make sure that you print on the glossy side only
Always load glossy paper with the glossy side facing up.
Check to see if the paper is curled or bent
To remove the curl, bend the sheet gently in the direction opposite the curl.
2
) to avoid blurring or smudging on the paper.
Problems and Solutions
Troubleshooting 319