Canon imageRUNNER ADVANCE 6065 User Manual page 129

[Rotate 90 Degrees] appears only if an
optional finisher is not attached.
G If you want holes made in your out-
put:
❑ Move the focus to [Hole Punch] ©
press
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
G If you want fold made in your out-
put:
❑ Move the focus to [Fold] © press
(Select).
❑ Move the focus to desired fold type
and press
(Confirm).
G If you want to offset the output:
❑ Move the focus to [Offset] © press
(Select).
1
(Select).
(Select) © press
Basic Copy Settings 2-77
2