Canon Color imageCLASS MF8050Cn Starter Manual page 9

1 2
Preface Installing the Machine
Hold the lock release
lever and slide the paper
guides.
Spread the paper guides a
little wider than the actual
paper width.
Slide the side paper guides.
Slide the paper guides to the
width of the loaded paper.
Push in the paper cassette.
3
Configuring and Connecting the Fax
Slide the side paper
guides.
Spread the paper guides a little
wider than the actual paper width.
Load the paper.
Align the edge of the paper stack with the
rear side of the paper cassette.
Hold the lock release lever and
slide the paper guides.
Slide the paper guides to the
width of the loaded paper.
• When loading Legal size paper
When the paper cassette is inserted with it
extended, the front side of the paper cassette
is not flush with the front surface of the
machine as shown in the figure.
4
Connecting to a Computer and
Installing the Drivers
•
When loading Legal size paper
Hold the lock
release lever.
•
When changing the size of the paper to be loaded
Be sure to register the paper size.
→ "Setting a Paper Size and Type" (P. 10)
Set the paper
under the hooks.
Hooks
Check!
Make sure that the paper stack does not
exceed the line of the load limit mark.
Appendix
Adjust the length of
the paper cassette.
When using envelopes
For details on how to load media,
see "Basic Operation Guide. "
Hooks
Hooks
Load limit mark.
Up to here
Set the Legal dust cover on the
paper cassette.
7