Handling Precautions - Canon SELPHY CP800 User Manual

Compact Power Adapter CA-CP200 W
Rated Input
Rated Output
Operating Temperatures
Weight
Battery Pack NB-CP2L (Sold Separately)
Type
Nominal Voltage
Nominal Capacity
Battery Life (Charge Cycles)
Operating Temperatures
Dimensions
Weight
All data is based on tests by Canon.

Printer specifications or appearance are subject to change without notice.

As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

Handling Precautions

Do not subject the printer to excessive force. Force or impact on the printer may result in paper jams or

equipment damage.
Be careful not to spray the equipment with insecticides or other volatile substances. In addition, do not

store the equipment in contact with rubber or vinyl products for long periods of time. This may cause
deterioration of the casing.
Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not a

malfunction. SELPHY will resume normal printing as soon as it cools down. Temporary stoppages increase
printing time and are most likely to occur when printing continuously, if a room is unusually warm, or if the
air vents on the back of SELPHY are blocked and internal temperature is high.
Avoid condensation on SELPHY when moving it from a cold to a warm place by putting it in an airtight,

sealable plastic bag and allowing for adjustment to temperature changes gradually before removing from
the bag. In the event that condensation does form within SELPHY, keep it at room temperature until the
water droplets evaporate naturally before use.
When SELPHY becomes dirty, wipe the casing with a soft dry cloth.

When dust or dirt has accumulated on the battery cover or vents

cassette (p. 14) before cleaning. If dust gets in through the vents, the printer may not print cleanly.
Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may cause
deformation or peeling of the casing.
3
100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)
24 V DC, 2.2 A
0 – 40 °C (32 – 104 °F)
Approx. 310 g (10.9 oz.)
Rechargeable lithium-ion battery
22.2 V DC
1200 mAh
Approx. 300 times
5 – 40 °C (41 – 104 °F)
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Approx. 230 g (8.11 oz.)
(pp. 6, 29), be sure to remove the ink