Using The Battery Pack - Canon SELPHY CP800 User Manual

Using the Battery Pack

Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.
* The number of possible prints is based on Canon testing standards, and may change depending on printing
conditions.
Installing the Battery
1
2
3
Charging the Battery
For cautions concerning the battery, refer to the user guide included with the battery.

When

longer,
press any button other than the q button,
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.

If a red

Air Vents
is displayed and you press any button other than the q button for 3 seconds or
will disappear. When the screen is turned off while the battery is charging and you
appears, the battery has reached the end of its life span. Purchase a new battery.
Remove the battery cover.
Slide and hold the cover lock (), then remove the cover

towards ().
Remove the battery terminal cover.
Attach the battery.
Insert the tab (), then push the battery () until it clicks

and locks into place.
Plug in SELPHY (p.
 Charging starts and
Charging completes after approximately 4 hours. and

disappears.
If you press the q button while the battery is

11), SELPHY can be used; however, charging will stop.
When you turn SELPHY off
charging resumes.
will appear after approximately 10 seconds.
10).
appears on the screen.
(p. 11), appears and
charging (p.