Canon PIXMA iP8500 Series Quick Start Manual page 95

You may cause injury or damage the printer if you ignore any of these safety
precautions.
Choosing a location
Power supply
Working around the
printer
Print heads and ink tanks For safety reasons store Print Heads and ink tanks out of the reach of small children.
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Ensure that the area around the power outlet is kept clear at all times so you
can easily unplug the power cord if necessary.
Do not place the printer with its back attached to the wall.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Never use a power supply source other than the one rated for the printer in the country where you
purchased the printer.
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol,
thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for
service.
Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and
damage the printer.
If a child ingests any ink, consult a doctor immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after printing.
The metal parts may be very hot and could cause burns.
Appendix
91