P A N E L F E E D I N G - Canon imageFORMULA DR-7080C Quick Reference Manual

P A N E L F E E D I N G

1
S T E P
2
S T E P
3
S T E P
4
S T E P
5
S T E P
Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.
From the application you are using, execute the required command to
start scanning. The [Start] key lamp will turn green.
Place the document on the scanner.
Press the [Start] key.
When scanning of the document is complete, the scanner goes into
Ready Mode. If you wish to scan another document, repeat steps 3
and 4.
To finish scanning, press the [Stop] key.
S C A N N I N G B A S I C S
1
6