Try Scanning - Canon CanoScan D1230UF Quick Start Manual

6. Try Scanning

1. Place your item (photo or picture) on the
glass.
Place the item face down and align its top edge with
the alignment mark at the back corner of the glass.
2. Click the [Start] menu and select [Programs],
[Adobe], [Photoshop 5.0 Limited Edition] and
[Photoshop 5.0 Limited Edition].
Photoshop LE will start.
< If you install another scanner or a digital camera, select this scanner. >
a. Click the [File] menu and select [Import] and
[Select TWAIN_32 Source].
b. Highlight [CanoScan D1230U] or [CanoScan
D2400U] and click [Select].
3. Click the [File] menu and select [Import] and
[Select TWAIN_32].
ScanGear CS-U will start.
4. Click [Preview].
After calibration, the preview scan will start and
gradually display the image.
7
D1230U/D2400U Quick Start Guide
Top
Bottom
Alignment Mark