Download Print this page

Canon PIXMA MX882 Series Getting Started page 63

Wireless inkjet office all-in-one
Hide thumbs Also See for PIXMA MX882 Series:

Advertisement

7
Press and hold the WPS button on the access point (for about
5 seconds), then press the OK button on the machine within 2
minutes.
For details on the WPS button pressing, refer to the manual of your access point.
The Wi-Fi lamp (blue) on the machine flashes while searching for or connecting to
an access point.
Mantenga pulsado el botón WPS del punto de acceso (durante
unos 5 segundos) y, a continuación, pulse el botón OK en el equipo
en menos de 2 minutos.
Para obtener más información sobre cómo pulsar el botón WPS, consulte
el manual del punto de acceso.
La luz de Wi-Fi (azul) del equipo parpadeará mientras se busca el punto
de acceso o al conectarse a él.
8
When the above screen appears, press the OK button.
If the timeout error screen appears, press the OK button, then start over
from
.
If another error appears, refer to the printed manual: Network Setup
Troubleshooting.
Cuando aparezca la pantalla anterior, pulse el botón OK.
Si aparece la pantalla de error de tiempo de espera agotado, pulse el botón
OK y vuelva a empezar desde
.
Si se produce otro error, consulte el manual impreso: Solución de problemas
de configuración de red.
Next, read "11 Install
the Software (Network
Connection)" on page
39!
A continuación,
lea "11 Instalación
del software
(Conexión de red)"
en la página 39.


Advertisement

loading