Memory Operation - Canon VIXIA HF R20 Instruction Manual

6 Memory operation

N Record, M Record pause, A Playback, C Playback pause, I Fast playback,
J Fast reverse playback, G Slow playback, H Slow reverse playback,
E Frame advance*, F Frame reverse*.
* Available only when dividing scenes.
7 Remaining battery time
• The icon shows a rough estimate of
the remaining charge as a
percentage of the full charge of the
battery pack. The remaining recording/playback time of the battery pack is displayed,
in minutes, next to the icon.
• When is displayed in red, replace the battery pack with a fully charged one.
• When you attach an empty battery pack, the power may turn off without displaying
.
• Depending on the conditions under which the camcorder and the battery pack are
used, the actual battery charge may not be indicated accurately.
• When the camcorder is off, press R to display the charge status of a
battery pack. The Intelligent System will display the charge status (as a percentage)
and the remaining recording time (in minutes) for 5 seconds. If the battery pack is
exhausted, the battery information may not be displayed.
S h Remaining recording time
When there is no more free space on the memory, [f End] (built-in memory,
only) or [4 End] (memory card X) or [7 End] (memory card Y) will be
displayed in red and the recording will stop.
D f Number of available photos
6 / 8 in red: There is no memory card in the corresponding memory card slot.
4 / 7 in green: 6 or more photos U in yellow: 1 to 5 photos U in red: No more
photos can be recorded.
• When viewing the photos, the display will always be in green.
• Depending on the recording conditions, the number of available photos displayed
may not decrease even after a recording has been made, or may decrease by 2
photos at once.
100% 75% 50% 25%
Additional Information
0%
/
151