HP Compaq Presario,Presario 5116 Quick Start Manual page 94

If a solution does not fix
your problem, try all the
other solutions for the
symptom, or try the
solution a second time.
Symptom
No sound.
Sound is too low.
Information in this section is divided into three areas:
Symptom, Problem, and Solution.
The Symptom line describes the symptom or warning for the
type of problem you are having. The Problem column identifies
one or more reasons why the symptom has occurred. And the
Solution column describes what you should do to try to fix the
problem.
Note: Some of the symptoms listed for certain problems will not apply to
your computer. For specific problems relating to the monitor or printer, refer
to the documentation that came with the equipment.
Problem
Speakers are not
turned on.
Speaker cables are
not properly
connected.
Volume has been
muted.
Computer is in Sleep
mode, as indicated
by an unlit Power
Status light on the
front of the
computer.
Powered speakers
are not being used.
Volume has been
set too low.
Solution
Turn on the speakers.
Shut down your computer using the normal
shutdown procedure. Reconnect the speakers.
Refer to the Quick Setup Poster for instructions.
Always make sure that you follow the colour
coding, connecting the same colour connector to
the same colour port.
On the Windows taskbar, click the Volume icon and
clear the Mute check box.
See "Waking Your Computer" in this guide.
Use powered speakers.
Click the Volume icon on the Windows taskbar,
click the Volume slider bar, and then drag it up. Or
press the Volume Up button on your Compaq
Internet keyboard.