HP Compaq Presario,Presario 5116 Quick Start Manual page 26

c. Select Microsoft.
d. Click Add.
e. Select Microsoft.
f. Select TCP/IP.
g. Click OK.
6. Select the Identification Tab in the Network window and
complete the following steps:
a. Type a name for the computer. This name must be unique
– different from the name of every other computer in the
network. The name can contain a maximum of 15 letters,
numbers, and the following special characters:
! @ # $ % ^ & ( ) - _ ' {} ~
Do not use blank spaces in the Computer name box.
b. Type a Workgroup name. If you would like all computers
to have access to each other, the Workgroup name must
be the same for all of the computers on the network. The
name can contain a maximum of 15 letters, numbers, and
the following special characters:
! @ # $ % ^ & ( ) - _ ' {} ~
Do not use blank spaces in the Workgroup name box.
c. Click OK. The System Settings Change window is
displayed. Click Yes to restart your computer. The
Microsoft Networking window is displayed.
7. Complete the following steps:
a. Type a User name. Your user name needs to be easy to
remember because you will use it every time you log on
to your network.
b. Type a Password.
c. Click OK.
8. Close the Control Panel window.
9. Repeat this procedure to add the next computer to the network.