Removing Or Installing An Expansion Card - HP Compaq dx7300 MT Hardware Reference Manual

Microtower model business pc
Hide thumbs Also See for Compaq dx7300 MT:
Table of Contents

Advertisement

Removing or Installing an Expansion Card

The computer has two standard PCI expansion slots that can accommodate an expansion card up to
17.46 cm (6.875 inches) in length. The computer also has one PCI Express x1 expansion slot and one
PCI Express x16 expansion slot.
Figure 2-8
Item
Description
1
PCI expansion slot
2
PCI expansion slot
3
PCI Express x1 expansion slot
4
PCI Express x16 expansion slot
NOTE
expansion slot.
To remove, replace, or add an expansion card:
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as diskettes or compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION
board as long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the computer.
20
Chapter 2 Hardware Upgrades
Expansion Slot Locations
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16
Regardless of the power-on state, voltage is always present on the system
ENWW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx7300 - microtower pcCompaq dx7300

Table of Contents