2. Slide the drive into the drive bay, making sure to align the guide sctrews with the guide slots,
until the drive snaps into place.
3. Reconnect the power and data cables to the drive as shown in the following illustrations.
✎
Refer to
Chapter 4, "Serial and Parallel ATA Drive Guidelines and Features"
attaching the cabling to get optimum performance.
Connecting Optical Drive Cables
✎
Some products use straight cable connectors while others use right angle connectors.
Service Reference Guide, dc5700
Removal and Replacement Procedures— Microtower (MT) Chassis
437804-001
for information on
6–19