HP Compaq dc5700 MT Reference Manual page 122

Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
✎
A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
7. Push the module down into the socket, ensuring that the module is fully inserted and
properly seated. Make sure the latches are in the closed position 3.
8. Repeat steps 4 and 5 for any additional modules that you want to install.
✎
The computer automatically recognizes the additional memory when the computer is turned on.
To reassemble the computer, reverse the removal procedure.
✎
If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable
the Smart Cover Sensor.
7–18 437804-001 Service Reference Guide, dc5700