HP Compaq 6005 Pro Specifications page 8

Business pc

Hide thumbs Also See for Compaq 6005 Pro:

Maintenance & service manual (259 pages)

Maintenance and service manual (155 pages)

Hardware reference manual (62 pages)

Table of Contents

QuickSpecs

Standard Features and Configurable Components (availability may vary by country)

Chipset

Processor

One of the following

Memory

AMD 785G chipset

AMD Sempron Processors with HyperTransport™ Technology:

AMD Sempron 140 Processor (2.7 GHz, 1 MB L2 cache, HT bus 3.0)

AMD Athlon II Dual-Core Processors with HyperTransport Technology:

AMD Athlon II X2 215 Processor (2.7 GHz, 2MB L2 cache, HT bus 3.0)

AMD Athlon II X2 B22 Processor (2.8 GHz, 2 MB L2 cache, HT bus 3.0)

AMD Athlon II X2 B24 Processor (3.0 GHz, 2 MB L2 cache, HT bus 3.0)

AMD Phenom II Dual-Core Processors with HyperTransport Technology:

AMD Phenom II X2 B53 Processor (2.8 GHz, 1 MB L2 cache, 7 MB Total cache, HT

bus 3.0)

AMD Phenom II X2 B55 Processor 3.0 GHz, 1 MB L2 cache, 7 MB Total cache, HT

bus 3.0)

AMD Phenom II Triple-Core Processors with HyperTransport Technology:

AMD Phenom II X3 B73 Processor 2.8 GHz, 1.5 MB L2 cache, 7.5 MB Total cache,

HT bus 3.0)

AMD Phenom II X3 B75 Processor 3.0 GHz, 1.5 MB L2 cache, 7.5 MB Total cache,

HT bus 3.0)

AMD Phenom II Quad-Core Processors with HyperTransport Technology:

AMD Phenom II X4 B93 Processor 2.8 GHz, 2 MB L2 cache, 8 MB Total cache, HT

bus 3.0)

AMD Phenom II X4 B95 Processor 3.0 GHz, 2 MB L2 cache, 8 MB Total cache, HT

bus 3.0)

Supports un-buffered non-ECC DDR3 SDRAM

AMD processors support un-buffered non-ECC DDR3 SDRAM (synchronous dynamic random access

memory) at a frequency of up to 1333 MHz.

NOTE: The actual memory speed for DDR3 SDRAM depends on the processor and memory

NOTE:

configuration. The maximum speed of 1333 MHz requires an AMD Phenom II processor that supports it.

In addition, AMD Phenom II processors with CPUID 100F42h require that no more than one DIMM slot

per channel be populated with a DDR3 memory module in order to support a memory speed of 1333

MHz.

System memory upgrades are accomplished by adding DDR3 SDRAM module(s) to empty DIMM slots on

the system board.

CAUTION: Voltage is supplied to the memory modules whenever the computer is connected to an active

CAUTION:

AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage

to the memory modules or system board. The computer must be shut down with the AC power removed

(disconnect AC power cord at rear chassis or at AC outlet) prior to adding or removing SDRAM

modules.

DA - 13412

North America — Version 7 — November 4, 2009

HP Compaq 6005 Pro Business PC

SFF

Page 8

Show Quick Links

Hide quick links:

Table of Contents

HP Compaq 6005 Pro Specifications page 8

Hide quick links:

Related Manuals for HP Compaq 6005 Pro

Related Products for HP Compaq 6005 Pro

Table of Contents