Main Memory; Processors; Clear Cmos/Clear Password Jumpers - HP Brio BA300 Technical Reference Manual

system features

main memory

There are two 168-pin DIMM slots on the system board for installing main memory. All HP BA300 PC
models are supplied with a memory module of at least 64 MB non-ECC SDRAM. Only HP memory
modules are supported.

processors

The HP BA300 PC is equipped with either a single Socket 370 Intel Celeron or socket 370 Intel Pentium
III processor. Socket 370 is a conversion of Slot 1 (used previously by Celerons and Pentium Is) to a
socket, running at the same bus protocol as the Pentium II (the GTL+ bus protocol). The processor is
connected to the system board through a Flip Chip Plastic Grid Array (FCPGA) 370 socket. The
reduction in size achieved by the Socket 370 Celeron is due to the integration of the L2 cache on the
processor die. Like the Celeron processor, the Pentium III comes in a 370-pin socket (FCPGA) package.

clear CMOS/clear password jumpers

The positions of the Clear CMOS and Clear password jumpers are shown below:
16
Clear Password (J8)
Default position
Clear Passwords
Clear CMOS (J6)
Default position
Clear Passwords & CMOS