Regulatory Information - HP Brio 8500 User Manual

Regulatory Information

Manufacturer's Name:
Manufacturer's Address:
declares that the product
Product Name:
Model Number:
conforms to the following Product Specifications:
International: IEC 950:1991 +A1 +A2 +A3 +A4
Safety:
Europe:
EMC: CISPR 22:1993 / EN 55022:1994 Class B
EN 50082-1:1992
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8kV AD
IEC 801-3:1984 / prEN55024-3:1991 - 3V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 0.5 kV Signal Lines, 1 kV Power Lines
IEC 555-2:1982+A1:1985 / EN60555-2:1987
IEC 1000-3-3:1994 / EN61000-3-3:1995
FCC Title 47 CFR, Part 15 Class B
AS / NZ 3548:1992
Supplementary Information:
The product herewith complies with the requirements of the following Directives and carries the CE-marking
accordingly:
the EMC directive 89/336/EEC amended by the directive 93/68/EEC.
the Low Voltage Directive 73/23/EEC
1)
The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2)
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
and
Grenoble, March 4th 1998:
For Compliance Information ONLY, contact:
USA Contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA 94304.
(Phone: (415) 857-1501)
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Hewlett-Packard
5 Avenue Raymond Chanas - 38053 Grenoble Cedex 09 - FRANCE
Personal Computer
HP BRIO 83xx and 85xx
EN 60950:1992 +A1 +A2 +A3
1)
2)
/ ICES-003, Issue 2 / VCCI-2
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Jean-Jacques Ozil
Customer Satisfaction Manager
Regulatory and License Information
Regulatory Information
1)
47