3Com ProCurve E4500-48 Getting Started Manual page 57

Switch 4500 family
Table of Contents

Advertisement

Default Users and Passwords
57
Use the admin default user name (no password) to login and carry out
initial Switch setup.
To set a password for the admin user in the CLI, enter the following from
system view:
[4500]local-user admin <cr>
[4500-luser-admin]password simple xxxxxxxx
(where xxxxxxxx is your chosen password).
Save the configuration in the User View.
For information on the lost password procedure please refer to the
Configuration Guide that is supplied with your Switch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-portSwitch 4500 pwr 26-port

Table of Contents