Firmware Requirements; Front Panel - HP ProCurve 6120G/XG Installation Instructions

switch CLI, accessing it via serial interface attached to OA
and/or USB interface attached to the blade.
When using optional transceiver modules or direct-attach

cables, order the modules and cables separately. For more
information, see the QuickSpecs on the HP website
(http://www.hp.com/go/bladesystem/interconnects).
For more information on BladeSystem port mapping, see the

HP BladeSystem enclosure setup and installation guide that
shipped with the enclosure.
For the most current product information, see the release notes

at http://www.hp.com/go/bladesystem/documentation

Firmware requirements

Always install the most current firmware or software for the following
items:
 Server blade system ROMs
Ethernet mezzanines

 HP BladeSystem Onboard Administrator
HP ProCurve blade switch

For additional information on required firmware or software versions
and to download firmware or software updates, see the HP website:
1. Go to http://www.hp.com/#Support.
2. Click the "Download drivers and software" radio button.
3. Enter "6120G/XG" in the text box and click "Go".
4. Click the link for your operating system.
Download the appropriate software or firmware.
5.

Front Panel

Item Description
1 Port C1 (10GBASE-CX4)
2 Port X1 XFP (10-GbE) slot*
3 Port X2 XFP (10-GbE) slot*
4 Port S1 SFP (1-GbE) slot**
5 Port S2 SFP (1-GbE) slot**
6 Console port (USB 2.0 mini-AB connector)
7 Clear button
8 Ports 1–4 (10/100/1000BASE-T)
9 Reset button (recessed)
* Supports 10GBASE-SR XFP and 10GBASE-LR XFP pluggable
optical transceiver modules
** Supports 1000BASE-T SFP, 1000BASE-SX SFP, and 1000BASE-
LX SFP pluggable optical transceiver modules
LEDs
Item LED description
1 Module locator
(UID)
2 Module status
(health)
3 C1 port status
(10GBASE-CX4)
4 C1 activity
5 Port X1/X2 status
(XFP connector)
6 Port X1/X2
activity
7 Port S1/S2 status
(SFP connector)
8 Port S1/S2
activity
9 Port 1–4 port
status
10 Port 1–4
link/activity
11 Port 1–4
link/activity
Status
Blue = Module ID selected
Off = Module ID not selected
Green = Normal operation
Amber = Fault
Off = Power off
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green flashing = Activity
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green flashing = Activity
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green flashing = Activity
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green flashing = 10/100 activity
Amber flashing = 1000 activity