Wall Mounting - HP ProCurve 4202vl-48G Installation And Getting Started Manual

Procurve 4200vl series
Hide thumbs Also See for ProCurve 4202vl-48G:
Table of Contents

Advertisement

Installing the Switch 4200vl Series
Installation Procedures

Wall Mounting

The mounting brackets supplied with the switch allow you to mount it on a
wall. The illustrations below show mounting a Switch 4208vl. All other 4200vl
Switches would be mounted in a similar way.
C a u t i o n
For safe operation, do not install the switch with the vents or fans facing
downward. The only recommended and supported wall mounting orientation
is with the unit upright and the modules facing out, as shown in the illustra-
tions below.
Additionally, the switch should be mounted only to a wall or wood surface
that is at least 1/2-inch plywood or its equivalent.
1.
Figure 2-12. Install mounting bracket screws
2.
Figure 2-13. Installing wood screws for wall mounting
2-18
Use a #1 Phillips
(cross-head)
screwdriver and
attach the
mounting brackets
to the switch with
the included
10-mm M4 screws.
Attach the
switch to the
wall or wood
surface with four
5/8-inch number
12 wood screws
or larger (not
included).
10 mm
M4 screws
5/8-inch number
12 wood screws

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents