Back Of The Switch; Console Port; Power Connector - HP ProCurve 3400cl-48G Installation And Getting Started Manual

Introducing the Switch

Back of the Switch

Back of the Switch
Optional cl module slot
Optional cl module slot

Console Port

This port is used to connect a console to the switch by using the serial cable
supplied with the switch. This connection is described under "Connect a
Console to the Switch" in chapter 2, "Installing the Switch." The console can
be a PC or workstation running a VT-100 terminal emulator, or a VT-100
terminal. The console port is located on the front of the 3400cl-24G and on the
back of the 3400cl-48G.

Power Connector

The Series 3400cl Switch devices do not have a power switch; they are
powered on when connected to an active AC power source. These switches
automatically adjust to any voltage between 100--127 and 200--240 volts and
either 50 or 60 Hz. There are no voltage range settings required.
1-10
Cooling vents - make sure this is not
obstructed for proper switch operation
Cooling vents - make sure this is not
obstructed for proper switch operation
Auxiliary Port and LED
Console Port
ProCurve Switch 3400cl-24G
AC power connector
RPS Input Port
ProCurve Switch 3400cl-48G
RPS Input Port AC power connector