Testing The Switch By Resetting It; Procurve Networking Customer Support Services; Before Calling Support - HP ProCurve 1400-24G Installation And Getting Started Manual

Testing the Switch by Resetting It

If you believe the switch is not operating correctly, you can reset the switch
to test its circuitry and operating code. To reset a switch:
■ Unplug and plug in the power cord (power cycling)
Power cycling the switch cause the switch to perform its power-on self test,
which almost always will resolve any temporary operational problems. These
reset processes also cause any network traffic counters to be reset to zero,
and cause the System Up Time timer to reset to zero.
ProCurve Networking Customer
Support Services
If you are still having trouble with your switch, ProCurve Networking offers
support 24 hours a day, seven days a week through the use of a number of
automated electronic services. See the Customer Support/Warranty booklet
that came with your switch for information on how to use these services to
get technical support. The ProCurve Networking Web site,
also provides up-to-date support information.
www.procurve.com
Additionally, your ProCurve Networking authorized network reseller can
provide you with assistance, both with services they offer and with services
offered by ProCurve Networking.

Before Calling Support

Before calling your networking dealer or ProCurve Networking Support, to
make the support process most efficient, you first should have retrieved the
following information:
Information Item
• product identification, including mini-
GBICs
• copy of your network topology map, in-
cluding network addresses assigned to
the relevant devices
Troubleshooting
Testing the Switch by Resetting It
http://
Information Location
the front of the switch, and on labels on the
mini-GBICs
your network records
3-3