Print on envelopes and custom media sizes
To print on envelopes, complete the following steps.
Set Tray 2 to the correct media size. See
Load no more than 10 envelopes face-up with the flap of the envelope to the right, and the short
edge feeding into the device first.
Use your computer software program to complete the printing process.
wrinkled, nicked, curled, or otherwise damaged.
To print on custom media sizes, complete the following steps.
Change the device print settings, such as print quality, in HP Toolbox
To change the default print settings in HP Toolbox, complete the following steps.
Open HP Toolbox and click Device Settings.
Click the Settings tab.
On the Settings tab, you can modify settings that appear on the following pages.
Paper type settings
Click Apply to save the changes that you make on these pages.
settings that are established in HP Toolbox.
Print color documents from my computer in black and white only
In the software program, select File, Print, the HP Color LaserJet 1600 print driver, click Properties,
click the Color tab, and then select the Print in Grayscale check box. Click OK to save the print
properties, and then click OK again to print the document.
How do I?
For Tray 1, load one envelope at a time, face down and the flap to the right.
Do not use envelopes with windows or clasps, and do not use envelopes that are
The changes that you make to the print settings in HP Toolbox apply to all future print
If you have similar settings in the printer driver, those settings take priority over the
Loading Tray 2 or optional Tray