HP Premium Cover 200 g/m
HP Premium Plus Photo 220 g/m
Print the document. Remove the media from the device as it prints to prevent it from sticking
together, and place the printed pages on a flat surface.
The media type can also be selected and configured in HP Toolbox. To configure these media
types from HP Toolbox, click Device Settings, click the System Settings tab, and then open the
Print Modes page. Make any necessary changes, and then click Apply to save the changes.
To print a single-page cover letter on letterhead, followed by a multiple-page document, load a
single sheet of letterhead in Tray 1. After the letterhead page has printed, the device prompts you
to load paper. Load paper for the rest of the document.
Print on both sides of the paper
To manually print on both sides of the paper, you must send the paper through the device twice.
Insert enough paper into Tray 2 or optional Tray 3 to accommodate the print job.
Use the following procedure to configure the printer to print on both sides (manually):
Windows: In the printer driver, select the Finishing tab, select the Print on both sides
(manually) option, and then send the job to print.
After the job finishes printing, remove any blank paper from Tray 2 or optional Tray 3. Insert the
printed stack, with the blank side up, and the top edge leading into the device. Print the second
side from Tray 2 or optional Tray 3.
Do not print on both sides of labels or transparencies.
(Select) to continue printing.
Print: How do I?