Warming Drawer - Bosch HBL8450UC Installation Manual

Combo Oven with Microwave and

Warming Drawer 27"

It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
The cabinet base must be flat and capable of supporting a
weight of at least 369 lbs (167 kg).
English 4
27" Under-the-counter units
28
(718mm)
26 3/4"
(680mm)
24 13/16"
(630mm)
27 1/16"
(687mm)
29 1/16"
(738mm)
23 7/8" (606mm)
22 " (559mm)
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
The cabinet base must be flat and capable of supporting a
weight of at least 193 lbs (87 kg).
This Built –In Oven can be installed below any Bosch cook
top as long as there is no contact between the bottom of
the cook top and the top of the oven, except for the Bosch
Induction cooktop, where the gap must be of at least 1
16 1/2"
(419mm)
24 "
(610mm)
1/4" 20
min. 3 "
(508mm)
(76mm)
25 1/2"
(648mm)
4 3/4"
(121mm)
36 "
(915mm)
"
inch.