Drying; The Dryer; Cleaning The Fluff Filter; Removing The Laundry - Bosch WTS86500GB Installation Instructions, Instructions for Use, Programme Table Instruction Manual

Condenser dryer exxcel 8
Table of Contents

Advertisement

Inspecting

the dryer

nnecting the
mains plug
oading laundry
age 8.
woollens"
he programme
1
Water tank
drying programme ...
filling hole
2
with filter
idual requirements
Cover for
steam nozzle
are sensitive,
h is enough!
3
Start/Stop button
2h;
1 -24 hrs
loud).
0, 1, 2, 3, 4
On-Off
for the
0, 1, 2, 3
esetting = 0.
he others.
600-1800

Drying

Condensation container
Drum
Control panel
Air cooler
Air inlet
Fluff filter
Drying / Short spin /
Refresh
Emptying condensation
Empty the container after each drying cycle, not during drying!
1.
Remove the container, holding it level.
2.
Pour out condensation.
3.
Push the
container back in until it clicks into place.

Cleaning the fluff filter

1.
Open the door, remove the filter and fold open.
2.
Remove the fluff (by wiping the filter with your hand).
3.
Close the filter, insert it again and close the door.
4.
Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tank
1.
Remove the condensation tank.
2.
Remove the filter.
3.
Clean the filter under running water.
4.
Re-insert the filter and push in the condensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to Off.
Do not leave damp laundry in the dryer.

Removing the laundry

The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for
an hour (or two hours if you manually select the
Programme end
once
lights up in the display.
Interrupt programme
removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The selected programme must then be continued until it is finished.
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1.
Open the door. The drying cycle is paused.
2.
Remove or add laundry and close the door.
3.
If required, select a new programme and additional functions.
4.
Press the
Start/Stop button. The remaining time is updated after a few minutes.
3
if it is dirty
Reduced Ironing function, depending on the model.)
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

instructions for use

Table of Contents